Polyhouse Environment Monitoring & Alert System Using Sensors [ T - H -...

Polyhouse Environment Monitoring & Controlling Using Sensors with Arduino through SMS Alert | Poly House Environment Monitoring System | Greenhouse Temperature and Humidity Monitoring System | Environment Monitoring and Control of a Polyhouse Farm | Arduino & GSM Based Greenhouse Environment Monitoring & Controlling through SMS | Polyhouse Environment Monitoring & Alert System Using Sensors [ T - H - S ] with Arduino |GSM - SMS | Remote Monitoring and Control System for Environmental Parameters in Greenhouse. *********************************************************** If You Want To Purchase the Full Working Project KIT Mail Us: svsembedded@gmail.com Title Name Along With You-Tube Video Link We are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirements http://svsembedded.com/  https://www.svskits.in/ http://svsembedded.in/  http://www.svskit.com/ M1: +91 9491535690  M2: +91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service We Will Provide Project Soft Data through Google Drive 1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component 3. Project Sample Report / Documentation 4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code 6. Project Related Software Compilers 7. Project Related Sample PPT’s 8. Project Kit Photos 9. Project Kit Working Video links Latest Projects with Year Wise YouTube video Links 157 Projects  https://svsembedded.com/ieee_2022.php 135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php 103 Projects  https://svsembedded.com/ieee_2019.php 61 Projects  https://svsembedded.com/ieee_2018.php 171 Projects  https://svsembedded.com/ieee_2017.php 170 Projects  https://svsembedded.com/ieee_2016.php 67 Projects  https://svsembedded.com/ieee_2015.php 55 Projects  https://svsembedded.com/ieee_2014.php 43 Projects  https://svsembedded.com/ieee_2013.php 1100+ Projects https://www.svskit.com/2022/02/900-pr... *********************************************************** A Polyhouse Environment Monitoring and Alert System using sensors for Temperature (T), Humidity (H), and Soil Moisture (S) with Arduino and GSM SMS capabilities can be a valuable project for agricultural applications. This system allows you to remotely monitor and control the conditions inside a polyhouse and receive alerts via SMS when certain parameters go beyond predefined thresholds. Here's a step-by-step guide on how to build such a system: Components Needed: 1. Arduino board (e.g., Arduino Uno or Arduino Nano) 2. GSM module (e.g., SIM800L or SIM900) 3. Temperature and humidity sensor (e.g., DHT22 or DHT11) 4. Soil moisture sensor 5. Power supply for Arduino and GSM module 6. Jumper wires 7. Breadboard or PCB for circuit connections 8. SIM card with SMS capability Steps to Build the System: 1. Hardware Setup: • Connect the DHT22 or DHT11 sensor to the Arduino to measure temperature and humidity. • Connect the soil moisture sensor to the Arduino to measure soil moisture levels. • Connect the GSM module to the Arduino for sending SMS alerts. • Power the sensors, Arduino, and GSM module appropriately. 2. Arduino Programming: • Write an Arduino sketch to read data from the temperature, humidity, and soil moisture sensors. • Define threshold values for each parameter to trigger alerts. For example, you may want to send an alert if the temperature goes above a certain limit or if soil moisture falls below a certain level. • Use the GSM module to send SMS alerts when the sensor values exceed the defined thresholds. 3. Testing: • Upload the Arduino sketch to the Arduino board. • Test the system by exposing the sensors to various conditions and observe if SMS alerts are sent when thresholds are crossed. 4. Deployment: • Place the sensors inside the polyhouse. • Ensure a stable power supply for both the Arduino and GSM module. • Insert a SIM card with SMS capabilities into the GSM module. • Make sure the system has network coverage. 5. Monitoring and Alerts: • Regularly monitor the SMS alerts sent by the system to stay informed about the polyhouse conditions. • Adjust threshold values as needed based on the specific requirements of your plants. This system will help you maintain optimal environmental conditions inside the polyhouse, ensuring the well-being of your plants and crops.

IoT-Based Smart Real Time Garbage Monitoring System using ESP32, GPS, an...

IoT Smart Dustbin ESP32 - SIM800L | IoT-Based Garbage Container System Using NodeMCU ESP32 Microcontroller | IoT-Based Smart Real Time Garbage Monitoring System using ESP32, GPS, GSM- SIM800L | IOT BASED WASTE MONITORING AND COLLECTING SYSTEM FOR SMART CITY | IOT BASED SMART GARBAGE MONITORING SYSTEM USING NODEMCU + GSM + GPS + ULTRASONIC | IOT Based Smart Waste Dustbin Using NodeMCU. *********************************************************** If You Want To Purchase the Full Working Project KIT Mail Us: svsembedded@gmail.com Title Name Along With You-Tube Video Link We are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirements http://svsembedded.com/  https://www.svskits.in/ http://svsembedded.in/  http://www.svskit.com/ M1: +91 9491535690  M2: +91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service We Will Provide Project Soft Data through Google Drive 1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component 3. Project Sample Report / Documentation 4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code 6. Project Related Software Compilers 7. Project Related Sample PPT’s 8. Project Kit Photos 9. Project Kit Working Video links Latest Projects with Year Wise YouTube video Links 157 Projects  https://svsembedded.com/ieee_2022.php 135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php 103 Projects  https://svsembedded.com/ieee_2019.php 61 Projects  https://svsembedded.com/ieee_2018.php 171 Projects  https://svsembedded.com/ieee_2017.php 170 Projects  https://svsembedded.com/ieee_2016.php 67 Projects  https://svsembedded.com/ieee_2015.php 55 Projects  https://svsembedded.com/ieee_2014.php 43 Projects  https://svsembedded.com/ieee_2013.php 1100+ Projects https://www.svskit.com/2022/02/900-pr... *********************************************************** An IoT-based Smart Real-Time Garbage Monitoring System using ESP32, GPS, and GSM is a project that aims to create an efficient waste management system. This system can monitor the fill level of garbage bins in real-time, track their locations using GPS, and communicate this information over a cellular network (GSM) to a central server or dashboard. Here's an overview of how you can implement such a system: Components Needed: 1. ESP32 Development Board: ESP32 is a powerful microcontroller with built-in Wi-Fi and Bluetooth capabilities. It can be used to collect data from various sensors and communicate with other devices. 2. Ultrasonic or Infrared Distance Sensors: These sensors are used to measure the fill level of the garbage bins. Ultrasonic sensors bounce sound waves off the trash to determine how full the bin is. Infrared sensors work by emitting and receiving infrared light. 3. GPS Module: A GPS module is used to track the exact location of each garbage bin. It can provide latitude and longitude coordinates. 4. GSM Module: A GSM module (SIM800L, SIM900, etc.) is used for cellular communication. It enables the ESP32 to send data (garbage fill level and GPS coordinates) to a remote server or dashboard. 5. Power Supply: You'll need a power source for the ESP32 and other components, which can be a battery or a reliable power supply. 6. Server or Dashboard: You'll need a backend server or dashboard to receive and store data sent by the ESP32 modules. You can use cloud platforms like AWS, Azure, or create a custom server using a Raspberry Pi or a computer. Implementation Steps: 1. Connect Sensors: Connect the ultrasonic or infrared distance sensors to the ESP32. These sensors will be placed inside the garbage bins to measure the fill level. Program the ESP32 to read data from these sensors. 2. GPS Integration: Connect the GPS module to the ESP32 and configure it to provide location data. This data can include latitude and longitude coordinates. 3. GSM Module Configuration: Connect the GSM module to the ESP32 and configure it to send data over the cellular network. You will need a SIM card with an active data plan for this. 4. Data Transmission: Program the ESP32 to collect data from the sensors (garbage fill level) and GPS module (location). Periodically send this data to your server or dashboard using HTTP, MQTT, or any other suitable protocol. 5. Server/Cloud Setup: Set up a server or use a cloud platform to receive data from the ESP32 devices. Design a database to store the information. 6. User Interface: Create a user-friendly dashboard or mobile app to display real-time garbage bin fill levels and their locations. Users can monitor the status of the bins remotely. 7. Alerts and Notifications: Implement alerting mechanisms for when a bin reaches a certain fill level threshold. Notifications can be sent to relevant authorities or waste management teams.

ESP32 Real Time Clock Using NEO-6M GPS Module

Arduino GPS real time clock with NEO-6M module | Make GPS Clock using ESP32, GPS Module & LCD Display Real Time Clock with NEO-6M Module | ESP32 Real Time Clock with NEO-6M GPS Module | GPS Module with Arduino- Ublox NEO-6M | Real Time GPS Location Tracker | Nodemcu ESP8266 | ESP32 GPS Tracker | NEO6M | OLED | How to use NEO-6M GPS module with Arduino and get GPS location. *********************************************************** If You Want To Purchase the Full Working Project KIT Mail Us: svsembedded@gmail.com Title Name Along With You-Tube Video Link We are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirements http://svsembedded.com/  https://www.svskits.in/ http://svsembedded.in/  http://www.svskit.com/ M1: +91 9491535690  M2: +91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service We Will Provide Project Soft Data through Google Drive 1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component 3. Project Sample Report / Documentation 4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code 6. Project Related Software Compilers 7. Project Related Sample PPT’s 8. Project Kit Photos 9. Project Kit Working Video links Latest Projects with Year Wise YouTube video Links 157 Projects  https://svsembedded.com/ieee_2022.php 135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php 103 Projects  https://svsembedded.com/ieee_2019.php 61 Projects  https://svsembedded.com/ieee_2018.php 171 Projects  https://svsembedded.com/ieee_2017.php 170 Projects  https://svsembedded.com/ieee_2016.php 67 Projects  https://svsembedded.com/ieee_2015.php 55 Projects  https://svsembedded.com/ieee_2014.php 43 Projects  https://svsembedded.com/ieee_2013.php 1100+ Projects https://www.svskit.com/2022/02/900-pr... *********************************************************** Creating a real-time clock (RTC) using an ESP32 and a NEO-6M GPS module is a useful project, especially if you want to have precise timekeeping in your projects. Here's a step-by-step guide on how to set up an ESP32 with a NEO-6M GPS module to create an RTC: The ESP32 will communicate with the GPS module to obtain accurate time and date information, which can then be used as an RTC. Components you'll need: 1. ESP32 development board (e.g., ESP-WROOM-32) 2. NEO-6M GPS module 3. Breadboard and jumper wires 4. USB cable for power and programming 5. Arduino IDE or PlatformIO installed on your computer Components Needed: 1. ESP32 Development Board 2. NEO-6M GPS Module 3. Breadboard and jumper wires 4. USB Cable for power and programming Connections: Connect the NEO-6M GPS module to the ESP32 as follows: • NEO-6M VCC to ESP32 3.3V • NEO-6M GND to ESP32 GND • NEO-6M TX to ESP32 RX2 (GPIO17) • NEO-6M RX to ESP32 TX2 (GPIO16) Circuit Connection: Connect the NEO-6M GPS module to the ESP32 as follows: • Connect the VCC pin of the GPS module to 3.3V on the ESP32. • Connect the GND pin of the GPS module to GND on the ESP32. • Connect the TX pin of the GPS module to a GPIO pin (e.g., GPIO16) on the ESP32 (this is for receiving data from the GPS module). • Connect the RX pin of the GPS module to a GPIO pin (e.g., GPIO17) on the ESP32 (this is for transmitting data to the GPS module). Software Setup: 1. Install the Arduino IDE or PlatformIO if you haven't already. 2. Install the ESP32 board support in your Arduino IDE or PlatformIO. 3. Install the "TinyGPS++" and "NeoGPS" libraries for GPS parsing. You can install these libraries via the Arduino Library Manager. 4. Arduino IDE with the ESP32 board support installed. 5. Adafruit_GPS library (install it via the Arduino Library Manager). Arduino Sketch: Here's a basic sketch to create a real-time clock using the ESP32 and NEO-6M GPS module: Explanation: • We use the Adafruit GPS library to communicate with the NEO-6M GPS module. • In the setup function, we initialize the GPS module and configure it to send only RMC and GGA sentences at a 1Hz update rate. • In the loop function, we continuously read data from the GPS module and parse it. • When a valid fix is obtained (GPS fix is true), we extract the time and date information and can use it to set the ESP32's internal RTC (uncomment the RTC adjust line if you want to set the RTC). • Finally, we print the time and date information to the serial monitor. This code provides a basic example of how to use a NEO-6M GPS module with an ESP32 to create a real-time clock. You can expand upon this code to suit your specific project requirements.

IoT Based Smart WiFi Controlled Door Lock System using ESP32

IOT Based Electronic Door Opener | ESP32 - IoT Based Smart Door Lock System Project | IoT Based Smart WiFi Controlled Door Lock System using ESP32 | Door Lock System using Password | smart door lock | iot based smart rfid door lock system | embedded systems projects | smart lock | iot projects | project ideas | arduino project | rfid based door lock system | iot based smart door lock system | school project | arduino projects | final year project | iot based rfid smart door lock with esp8266 | esp32 projects | esp32 project | projects | smart house | intruder alert project | mini project | ieee project | diploma projects | telegram projects | electronics projects. *********************************************************** If You Want To Purchase the Full Working Project KIT Mail Us: svsembedded@gmail.com Title Name Along With You-Tube Video Link We are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirements http://svsembedded.com/  https://www.svskits.in/ http://svsembedded.in/  http://www.svskit.com/ M1: +91 9491535690  M2: +91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service We Will Provide Project Soft Data through Google Drive 1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component 3. Project Sample Report / Documentation 4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code 6. Project Related Software Compilers 7. Project Related Sample PPT’s 8. Project Kit Photos 9. Project Kit Working Video links Latest Projects with Year Wise YouTube video Links 157 Projects  https://svsembedded.com/ieee_2022.php 135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php 103 Projects  https://svsembedded.com/ieee_2019.php 61 Projects  https://svsembedded.com/ieee_2018.php 171 Projects  https://svsembedded.com/ieee_2017.php 170 Projects  https://svsembedded.com/ieee_2016.php 67 Projects  https://svsembedded.com/ieee_2015.php 55 Projects  https://svsembedded.com/ieee_2014.php 43 Projects  https://svsembedded.com/ieee_2013.php 1100+ Projects https://www.svskit.com/2022/02/900-pr... *********************************************************** Creating an IoT-based smart WiFi-controlled door lock system using an ESP32 is an interesting project that combines hardware and software development. Below is a high-level overview of the steps to get you started on this project. Please note that this is a complex project, and you should have some experience with electronics, programming, and IoT devices to complete it successfully. Components Required: 1. ESP32 development board 2. Servo motor or an electronic door lock 3. Power supply (if required for the servo motor) 4. WiFi router 5. Mobile device or computer for controlling the lock 6. Jumper wires 7. Breadboard (optional) Step 1: Setting up the ESP32 1. Install the Arduino IDE on your computer if you haven't already. 2. Add the ESP32 board to the Arduino IDE. You can do this by following the instructions in the "ESP32 Arduino Core" GitHub repository. 3. Write the firmware for your ESP32. You'll need to use libraries like WiFi to connect to your WiFi network and Servo to control the servo motor or door lock. Your code should create a web server to handle HTTP requests. 4. Upload the firmware to your ESP32. Step 2: Building the Hardware 1. Connect the servo motor to the ESP32. You'll need to connect the servo's signal wire to one of the ESP32's GPIO pins. Make sure to provide power to the servo if required. 2. Power up the ESP32 using a suitable power source. Step 3: Building the Web Interface 1. Create a web interface or mobile app that allows users to control the lock. You can use HTML, CSS, and JavaScript for this purpose. The web interface should send HTTP requests to the ESP32 to trigger the lock. 2. Use AJAX or fetch API to send POST or GET requests to the ESP32's IP address and port when the user presses the lock/unlock button. Step 4: Handling HTTP Requests 1. In your ESP32 firmware, set up a web server that listens for incoming HTTP requests. 2. Define routes for controlling the lock, such as lock and unlock. When these routes are accessed via a web request, trigger the servo motor to lock or unlock the door accordingly. 3. Implement security measures such as authentication or encryption to ensure only authorized users can control the lock. Step 5: Testing and Deployment 1. Test the entire system to make sure it works as expected. 2. Securely mount the hardware to your door and ensure it functions reliably. 3. Consider adding additional features like real-time notifications, access logs, and user management for a more complete smart door lock system.

IOT Based Smart Agriculture Monitoring System Using Arduino With GPRS Mo...

Smart Agriculture and Smart Farming using IoT Technology | iot based smart agriculture monitoring system | smart irrigation system | smart agriculture system | smart agriculture | smart agriculture using iot project report | iot agriculture system | smart agriculture using iot projects | agriculture | iot smart plant system | agriculture monitoring system | smart agriculture using iot pdf | iot based smart agriculture monitoring system project pdf | iot based smart agriculture | smart agriculture system using iot. *********************************************************** If You Want To Purchase the Full Working Project KIT Mail Us: svsembedded@gmail.com Title Name Along With You-Tube Video Link We are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirements http://svsembedded.com/  https://www.svskits.in/ http://svsembedded.in/  http://www.svskit.com/ M1: +91 9491535690  M2: +91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier Service We Will Provide Project Soft Data through Google Drive 1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component 3. Project Sample Report / Documentation 4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code 6. Project Related Software Compilers 7. Project Related Sample PPT’s 8. Project Kit Photos 9. Project Kit Working Video links Latest Projects with Year Wise YouTube video Links 157 Projects  https://svsembedded.com/ieee_2022.php 135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php 103 Projects  https://svsembedded.com/ieee_2019.php 61 Projects  https://svsembedded.com/ieee_2018.php 171 Projects  https://svsembedded.com/ieee_2017.php 170 Projects  https://svsembedded.com/ieee_2016.php 67 Projects  https://svsembedded.com/ieee_2015.php 55 Projects  https://svsembedded.com/ieee_2014.php 43 Projects  https://svsembedded.com/ieee_2013.php 1100+ Projects https://www.svskit.com/2022/02/900-pr... *********************************************************** Creating an IoT-based Smart Agriculture Monitoring System using Arduino can greatly improve the efficiency and productivity of farming. In this project, we'll use Arduino, various sensors, and an IoT platform like ThingSpeak or Adafruit IO to collect data and monitor the agricultural environment remotely. Here's a step-by-step guide to help you get started: Components Needed: 1. Arduino (e.g., Arduino Uno or Arduino Mega) 2. Sensors: • Soil Moisture Sensor • DHT22 or DHT11 Temperature and Humidity Sensor • Light Sensor (LDR) • Rainfall Sensor (optional) 3. ESP8266 Wi-Fi module or ESP32 (for IoT connectivity) 4. Relay module (for controlling irrigation systems) 5. Power supply (solar or standard power source) 6. Water pumps, valves, or actuators (for automated irrigation) 7. Enclosure for outdoor installation (to protect electronics) 8. Jumper wires, breadboard, and connectors 9. Internet connection Project Steps: 1. Hardware Setup: • Connect the sensors and actuators to the Arduino using jumper wires. • Connect the ESP8266 or ESP32 to the Arduino using serial communication or I2C for data transfer. • Make sure all connections are secure and powered properly. 2. Sensor Data Collection: • Read data from the soil moisture sensor to monitor soil moisture levels. • Use the DHT22/DHT11 sensor to measure temperature and humidity. • The light sensor can be used to monitor light intensity. • Optionally, include a rainfall sensor to measure precipitation. 3. Arduino Programming: • Write Arduino code to read data from the sensors. • Implement control logic for irrigation systems based on the sensor data. For example, turn on/off water pumps or open/close valves. • Create a mechanism to send sensor data and control commands to the IoT platform via the ESP8266 or ESP32. 4. IoT Integration: • Sign up for an IoT platform like ThingSpeak, Adafruit IO, or Ubidots. • Obtain the necessary credentials (API keys) to connect your Arduino to the platform. • Modify your Arduino code to send sensor data to the IoT platform periodically. • Set up dashboards and alerts on the IoT platform to visualize and analyze the data remotely. 5. Remote Monitoring and Control: • Access your IoT platform's dashboard or mobile app to remotely monitor the agricultural conditions. • Implement automation rules and alerts to trigger actions (e.g., irrigation) based on specific conditions (e.g., low soil moisture). 6. Power Supply: • Depending on your project's location, consider using solar power or a reliable power source to ensure continuous operation. 7. Enclosure and Weatherproofing: • Place the components in a weatherproof enclosure to protect them from environmental factors. • Ensure that the sensors can still gather accurate data while inside the enclosure.