GSM Based Motor
Control for Irrigation System
ABSTRACT
AIM:
The main aim of this project is to Design low
cost cell phone - GSM based Irrigation
Motor pump control using manual /
Automatic.
CONTACT: 9491535690, 7842358459
PURPOSE:
The purpose of this project is to provide cell
phone based embedded system for irrigation to reduce the manual monitoring of
the field and get the information in the form of SMS.
CONTACT: 9491535690, 7842358459
DESCRIPTION:
Agriculture is a subsistence of majority
Indians and has great effect on the economy of the country. In a country like
India, where climatic conditions change sustainably and irrigation facilities
are poor. The main source for irrigation process is ground water. Nowadays
ground water level is reduced drastically. In order to compensate this problem
farmers are using both well and bore well to utilize ground water.
Generally frequent power cuts and insufficient
rains at various stages of growth are one of major causes of losses to farmers.
Many farmers use induction motor pumps to irrigate their farms from wells. In
this application, GSM modem sending SMS message to former.
OWNER Receiving SMS Format:
Ø Power came
Ø Manually Motor Pump on
Ø Manually Motor Pump off
Ø No water at field Motor on
Ø Water at field motor off
Ø Motor Successfully on
Ø Motor Successfully off
Ø Owner and worker combination.
CONTACT: 9491535690, 7842358459
OUTPUT WINDOW
HARDWARE USED:
·
At89s52 CONTROLLER
·
MOTOR
·
POWER SUPPLY
·
GSM MODEM
·
LCD
·
OP-AMP
LM358
·
SOIL SENSOR
·
Relay coil
·
DRIVER IC
·
Switch Buttons
SOFTWARE USED:
· KEIL UVISION
· EMBEDDED
‘C’
·
EXPRESS PCB
·
EXPRESS SCHEMATIC
CONTACT: 9491535690, 7842358459
RESULT:
By using this project we can implement Ultra
low cost cell phone based embedded system for Irrigation.
No comments:
Post a Comment