Voice Recognition Wireless Home Automation & Sensors Monitoring System Based On Bluetooth
https://youtu.be/wqtle1pC-iE
https://youtu.be/wqtle1pC-iE
ABSTRACT
AIM:
The main objective of this project
is to develop a home automation system using an Arduino board with Bluetooth being
remotely controlled by any Android OS smart phone. As technology is advancing
so houses are also getting smarter. Modern houses are gradually shifting from
conventional switches to centralized control system, involving remote
controlled switches. Presently, conventional wall switches located in different
parts of the house makes it difficult for the user to go near them to operate.
Even more it becomes more difficult for the elderly or physically handicapped
people to do so. Remote controlled home automation system provides a most
modern solution with smart phones.
In order to achieve this, a Bluetooth
module is interfaced to the Arduino board at the receiver end while on the transmitter
end, a GUI application on the cell phone sends ON/OFF commands to the receiver
where loads are connected. By touching the specified location on the GUI, the
loads can be turned ON/OFF remotely through this technology. The loads are
operated by Arduino board through opto-isolators and thyristors using triacs.
android app link :
https://play.google.com/store/apps/details?id=appinventor.ai_cempehlivan92.Arduino_Sesli_Kontrol
software code:
#include <LiquidCrystal.h>
#include <SoftwareSerial.h>
LiquidCrystal lcd(7,8,9,10,11,12);//rs,en,data pins d4 -d7
SoftwareSerial myserial(4, 5); // RX, TX
int led1 = 3; //Connect LED 1 To Pin #2
int led2 = 4; //Connect LED 2 To Pin #3
int led3 = 5; //Connect LED 3 To Pin #6
int led4 = 6; //Connect LED4 To Pin #1
String voice;
char c;
int val;
float TEMP;
unsigned int SMOKE;
const int buzz=13; // the number of the LED pin
void setup()
{
lcd.begin(16,2);
pinMode(buzz, OUTPUT);
pinMode(led1, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led4, OUTPUT);
myserial.begin(9600);
myserial.println("voice based home automation using bt");
lcd.setCursor(0,0);
lcd.print("VOICE BASED HOME");
lcd.setCursor(0,1);
lcd.print("AUTOMATION B.T");
delay (3000);
lcd.clear();
}
void allon(){digitalWrite(led1, HIGH);delay (300);digitalWrite(led2, HIGH);delay (300);digitalWrite(led3, HIGH);delay (300); digitalWrite(led4, HIGH);delay (300);}
void alloff(){digitalWrite(led1, LOW);delay (300);digitalWrite(led2, LOW);delay (300);digitalWrite(led3, LOW);delay (300);digitalWrite(led4, LOW);delay (300);}
//-----------------------------------------------------------------------//
void loop()
{
val = analogRead(0);float T=( val/1024.0)*5000;float TEMP= T/10;
SMOKE = analogRead(1);
lcd.setCursor(0,0);lcd.print("T:");lcd.setCursor(3,0);lcd.print(TEMP);delay (50);
lcd.setCursor(0,1);lcd.print("S: ");lcd.setCursor(3,1);lcd.print(SMOKE);delay (50);
if (TEMP>60)
{digitalWrite(buzz, HIGH);myserial.println("OVER TEMPERATRE");myserial.print("TEMP:");myserial.print( TEMP);myserial.println("deg");delay (10);}
if (TEMP<60)
{digitalWrite(buzz, LOW);}
if (SMOKE>750)
{digitalWrite(buzz, HIGH);myserial.println("SMOKE ALERT");myserial.print("SMOKE:");myserial.print( SMOKE);myserial.println(" ");delay (10);}
if (SMOKE<750)
{digitalWrite(buzz, LOW);}
//////////////////////////////////////////////////////////////////////////////////////////
while (myserial.available()){ //Check if there is an available byte to read
delay(10); //Delay added to make thing stable
char c = myserial.read(); //Conduct a serial read
if (c == '#') {break;} //Exit the loop when the # is detected after the word
voice += c; //Shorthand for voice = voice + c
}
if (voice.length() > 0) {
Serial.println(voice);
//-----------------------------------------------------------------------//
//----------Control Multiple Pins/ LEDs----------//
if(voice == "*all on"){lcd.clear();lcd.setCursor(0,0);lcd.print("all on");allon();myserial.println("all on");delay (3000);lcd.clear();} //Turn on All Pins (Call Function)
else if(voice == "*all of"){lcd.clear();lcd.setCursor(0,0);lcd.print("all off");alloff();myserial.println("all off");delay (3000);lcd.clear();} //Turn off All Pins (Call Function)
//----------Turn On One-By-One----------//
else if(voice == "*light on"){lcd.clear();lcd.setCursor(0,0);lcd.print("light on");digitalWrite(led1, HIGH);myserial.println("light on");delay (3000);lcd.clear();}
else if(voice == "*bulb on"){lcd.clear();lcd.setCursor(0,0);lcd.print("bulb on");digitalWrite(led3, HIGH);myserial.println("bulb on");delay (3000);lcd.clear();}
else if(voice == "*LED on"){lcd.clear();lcd.setCursor(0,0);lcd.print("LED ON");digitalWrite(led4, HIGH);myserial.println("LED on");delay (3000);lcd.clear();}
else if(voice == "*fan on"){lcd.clear();lcd.setCursor(0,0);lcd.print("fan on");digitalWrite(led2, HIGH);myserial.println("fan on");delay (3000);lcd.clear();}
else if(voice == "*DC on"){lcd.clear();lcd.setCursor(0,0);lcd.print("DC MOTOR/FAN ON");digitalWrite(led2, HIGH);myserial.println("DCMOTOR on");delay (3000);lcd.clear();}
else if(voice == "*AC on"){lcd.clear();lcd.setCursor(0,0);lcd.print("AC on");digitalWrite(led2, HIGH);myserial.println("AC on");delay (3000);lcd.clear();}
//----------Turn Off One-By-One----------//
else if(voice == "*light off"){lcd.clear();lcd.setCursor(0,0);lcd.print("light off");digitalWrite(led1, LOW);myserial.println("light off");delay (3000);lcd.clear();}
else if(voice == "*bulb of"){lcd.clear();lcd.setCursor(0,0);lcd.print("bulb of");digitalWrite(led3, LOW);myserial.println("bulb oF");delay (3000);lcd.clear();}
else if(voice == "*LED off"){lcd.clear();lcd.setCursor(0,0);lcd.print("LED OFF");digitalWrite(led4, LOW);myserial.println("LED OFF");delay (3000);lcd.clear();}
else if(voice == "*fan of"){lcd.clear();lcd.setCursor(0,0);lcd.print("fan off");digitalWrite(led2, LOW);myserial.println("fan of");delay (3000);lcd.clear();}
else if(voice == "*DC of"){lcd.clear();lcd.setCursor(0,0);lcd.print("DC MOTOR/FAN OFF");digitalWrite(led2, LOW);myserial.println("DCMOTOR OFF");delay (3000);lcd.clear();}
else if(voice == "*AC off"){lcd.clear();lcd.setCursor(0,0);lcd.print("AC oFF");digitalWrite(led2, LOW);myserial.println("AC OFF");delay (3000);lcd.clear();}
//-----------------------------------------------------------------------//
voice="";}} //Reset the variable after initiating
