Arduino Based Alcohol Sensing Alert
System Using GPS and GSM
ABSTRACT
CONTACT: 9491535690,
7842358459
The main
purpose behind this project is “Drunk driving detection”. Now a days, many
accidents are happening because of the alcohol consumption of the driver or the
person who is driving the vehicle. Thus Drunk driving is a major reason of
accidents in almost all countries all over the world. Alcohol Detector in Car
project is designed for the safety of the people seating inside the car. This
project should be fitted / installed inside the vehicle.
This system designs the scene of the Alcohol alarm
system based on Arduino , GSM and GPS. When the Person ALCOHOL taken automatic
alarm can be realized. Vehicles state and user information as well as alarm
locations will be transmitted to the Pre-set of particular numbers. After
receiving related alarming information on its google map.
PURPOSE: Now a day accidents are occurring
frequently and it is very difficult to help them in critical conditions. We
need an automatic system to monitor and inform whenever alcohol taken while
travelling. With
the problem of global population aging increasing, lack of medical facility at
the location of accident, inadequate accident sense system performance and
other related issues have become increasingly prominent.
PROJECT
DESCRIPTION:
With the problem of global population aging
increasing, lack of medical hardware at the near of accident place, inadequate accident
sense system performance and other related issues have become increasingly
prominent. This paper presents the design and implementation of scene of the alcohol
alarm system based with wireless network communications based on Arduino, GPS
and GSM, Pre-set of particular numbers as the information processing terminal for
the location display and warns the alarm for the particular people with
location. wireless communication technologies of
GSM through short message format.
|
CONTACT: 9491535690,
7842358459
Bridge
Rectifier
|
Filter
Circuit
|
Regulator section
|
Technology:
GPS:
GPS (Global
Positioning System) technology is used to find the location of any object or
vehicle to monitor a child continuously using satellite signals. Three
satellite signals are necessary to locate the receiver in 3D space and fourth
satellite is used for time accuracy.GPS will give the information of parameters
like longitude, latitude and attitude.
With the help of these parameters one can easily locate the position of
any object. In this GPS technology, the communication takes place between GPS
transceiver and GPS satellite.
GSM:
GSM (Global System for
Mobile communications) is the technology that underpins most of the world's
mobile phone networks. The GSM platform is a hugely successful wireless
technology and an unprecedented story of global achievement and cooperation.
GSM has become the world's fastest growing communications technology of all
time and the leading global mobile standard, spanning 218 countries. GSM is an
open, digital cellular technology used for transmitting mobile voice and data
services. GSM operates in the 900MHz and 1.8GHz bands GSM supports data
transfer speeds of up to 9.6 kbps, allowing the transmission of basic data
services such as SMS.
CONTACT: 9491535690,
7842358459
HARDWARE REQUIREMENT:
- ARDUINO UNO R3
- GPS MODEM
- LCD
- MAX232
- GSM MODEM
- ALCOHOL SENSOR
- BUZZER
- DC MOTOR
SOFTWARES:
1.
EMBEDDED
C
2.
ARDUINO
COMPILER
3. EXPRESS PCB
RESULT
This system is easy to implement and reduce dead
percentage of people with the accident occur using the wireless communication
technologies.
CONTACT: 9491535690,
7842358459
No comments:
Post a Comment